How to use the anode and cathode buffer tank

The cathode and anode buffer tank electrochemical equipment is mainly used in metal surface treatment technologies such as electroplating and anodizing. Its function is to control the ratio of anions and cations in the metal electrolyte to maintain the stability of the electrolyte and improve the uniformity of the metal deposition composition. In the electrochemical reaction, the cathode and anode buffer tank can form a thin film on the metal surface to protect the metal surface from the influence of chemical reactions. In addition, the cathode and anode buffer tank can also increase the electroplating speed and deposition uniformity of the metal, thereby improving the quality of the product. The usage is as follows:

1. Prepare the liquid: Add enough electrolyte to the cathode buffer tank and dilute it to the correct concentration. Different types of electrolytes can be used as needed.

2. Connect electrodes: Connect the cathode and anode electrodes to the corresponding ports and ensure that the electrodes are in full contact with the liquid.

3. Set parameters: Set the liquid temperature, current and time as required. Make sure the parameters are set correctly to avoid possible damage.

4. Place the workpiece: Place the workpiece to be treated with cathode buffer in the liquid and ensure that it is completely covered.

5. Start processing: Start the cathode buffer processing process and monitor the processing process to ensure that the process proceeds smoothly.

6. Terminate processing: Terminate the processing process according to the set time or the status of the workpiece.

7. Cleaning the workpiece: After treatment, remove the workpiece from the liquid and rinse it thoroughly with water.

8. Clean the buffer tank: After processing, clean the tank to ensure that the old electrolyte is completely removed and ready for the next use.