How to use creatinine analyzer

1. Power on and off: Power on - press the power switch, the instrument will display "MEM" self-test. After the self-test is passed, the patient's name will be displayed, and the test board will automatically preheat. Shut down - press the "Cancel" key of the instrument, the instrument will stop testing and automatically shut down.

2. Test operation: Turn on the power switch, the screen will display MEM, and then the patient's name. Pull out all three lines, place them on the test seat, and press the "START" key to start the test. After 30 seconds, the patient's measured value will appear on the display.

3. Calibration: During the test, if you need to pause the test, press "PAUSE" to pause. At this time, the value on the display is in an adjustable state. Press the "ZERO" or "CAL" key to enter the internal standard solution (6mmol/L ) or calibration solution (10mmol/L), and then press the "START" key to retest.

4. Shut down: Press the power switch and the instrument will shut down.