Hematocrit Electrode Notes

The following points should be noted when using the hematocrit electrode:

1. The surface of the electrode should be clean, smooth and scratch-free. The electrode needs to be cleaned and disinfected before use to prevent the presence of bacteria or other contaminants.
2. Make sure the bend of the electrode is not damaged or cracked to avoid breakage during use or causing electrode failure.
3. Before inserting the electrode, it should be immersed in saline or other suitable electrolyte to ensure that the current can pass smoothly.
4. Be careful when inserting the electrodes to avoid damaging the patient's blood vessels or other tissues.
5. When using electrodes, the correct operating procedures and safety regulations should be followed to ensure correct and safe use.
6. Use appropriate force when inserting the electrode. Over-insertion or under-insertion may lead to inaccurate results.
7. When using electrodes, they should be selected according to the patient's specific situation and needs, such as quality and size.
8. Before using the electrode, check it for signs of damage or failure. If found, replace the electrode immediately.
9. When using and storing the electrode, be careful to avoid moisture, bending or any form of damage.
10. After use, the electrodes should be properly cleaned and sterilized again and stored in a dry and clean environment.