How to use large capacity low speed refrigerated centrifuge

The use of large-capacity low-speed refrigerated centrifuge is as follows:

1. Prepare the centrifuge: Make sure the centrifuge is installed and connected to the power supply. Make sure the centrifuge rotor and tube rack are properly installed and clean.

2. Prepare samples: According to the needs of the experiment, prepare the samples that need to be centrifuged. Make sure samples are clearly labeled and select appropriate centrifuge tubes and caps as needed.

3. Set the centrifuge parameters: Open the centrifuge control panel and set the centrifuge parameters, such as rotation speed and centrifugation time. Make sure the centrifuge parameters meet the experimental requirements.

4. Load the sample: Evenly load the sample into the centrifuge tube, and be careful not to exceed the maximum capacity of the centrifuge tube. Make sure the centrifuge tube lid is tightly closed to prevent sample from spilling during centrifugation.

5. Install the sample: Place the sample-filled centrifuge tubes into the rotor slot and secure them. Close the rotor cover and ensure that the centrifuge tube is tightly connected to the rotor to prevent loosening during centrifugation.

6. Start the centrifuge: Close the centrifuge lid and start the centrifuge. During the startup process, ensure that the centrifuge runs smoothly without abnormal noise or vibration.

7. Perform centrifugation: According to the experimental needs, set parameters such as centrifugation time and speed, and start the centrifuge. During the centrifugation process, ensure the smooth operation of the centrifuge and try to avoid vibration and interference of the centrifuge.

8. Stop centrifugation: After the centrifugation time is reached, stop the centrifuge. Before stopping centrifugation, make sure that the centrifuge speed has decreased steadily and that the sample in the centrifuge tube does not overflow.

9. Remove the sample: Carefully open the centrifuge cover and remove the sample from the centrifuge tube. According to experimental needs, transfer samples to other containers for further processing or analysis.

10. Clean the centrifuge: After using the centrifuge, clean the centrifuge rotor and tube rack. Use appropriate cleaning agents and disinfectants to ensure cleanliness and hygiene of the centrifuge.