How to use a large capacity high-speed desktop centrifuge

General steps for using a centrifuge:

1. Turn on the power: First, you need to turn on the power and wait for the instrument to preheat before starting the experiment.

2. Set the speed and time: Set the centrifugal force (g value) and centrifugal time according to experimental requirements.

3. Add experimental samples: Add the samples to be tested into the centrifuge tube.

4. Place the centrifuge tube in the rotor and make sure the lid is tightly closed.

5. Press the start button: Press the start button and the centrifuge starts working.

6. End of centrifugation: After centrifugation, press the stop button or wait for a while for the centrifuge to stop automatically.

7. Remove the sample: Carefully remove the centrifuge tube and remove it from the rotor.

8. Clean the centrifuge: Clean the rotor and centrifuge tubes to prevent cross contamination.

Please note that the specific operating steps may vary depending on the model of the centrifuge and the experimental requirements. Before starting the experiment, it is recommended to read the operating manual carefully and follow its instructions. In addition, when using a centrifuge, appropriate protective equipment should be worn, such as gloves and goggles, to prevent contact with the high-speed centrifuge rotor when the centrifuge is running.