How to use the disposable centrifugal cup blood component separator

The method of using the disposable centrifugal cup blood component separator is as follows:

1. Install the pipette: Install the pipette onto the side of the centrifuge cup.
2. Unpack: Take out the centrifuge cup from the shockproof plastic bag, take out the centrifuge cup, cup cover and coaster, and place it on a stable surface.
3. Install the blood collection tube: Insert the blood collection tube into the tube holder of the centrifuge cup.
4. Turn on the power switch: Press the power switch on the top of the centrifuge cup.
5. Set the speed and time: Touch the "Set" key, touch the "Speed" key, select the desired speed, touch the "Time" key, and select the desired time.
6. Start centrifugation: Touch the "Run" button to start the centrifuge. When the speed and time reach the set value, the centrifuge stops automatically.
7. Transfer liquid: Use a pipette to transfer the required liquid.
8. Clean the instrument: Pour the waste liquid into the designated waste liquid container, remove the cup cover, sterilize the centrifuge cup in disinfectant water, rinse it with sterile water, and wipe it dry before use.

Please note that proper operating procedures must be followed when using the single-use centrifugal cup blood component separator to avoid possible injury or equipment damage.