How to use the allergen IGE antibody detector

1. Prepare the sample: Collect the patient's blood sample and place it in a centrifuge tube or test tube.

2. Detector preparation: Make sure that the allergen IgE antibody detector is plugged in and in working condition. Set the working parameters of the detector according to the equipment manual.

3. Sample processing: Use specific reagents or test strips to process blood samples according to the instructions. These reagents or test strips can be used to extract and measure IgE antibody levels in blood.

4. Add sample: According to the specifications and requirements of the detector, add the processed sample or reagent into the sample tank or reactor of the detector.

5. Start the test: Press the start button on the detector or follow the instructions in the instruction manual to start the IgE antibody test of the sample.

6. Result analysis: Wait for a period of time (usually a few minutes to a few hours), and the detector will automatically display the results on the screen or print out. Note that interpretation of results requires reference to the IgE antibody level range allowed by the instrument.

7. Interpretation of results: According to the instructions of the instrument or relevant clinical references, interpret the test results and determine whether the patient has an allergic reaction to certain allergens.

It should be noted that before using the allergen IgE antibody detector, you must read the instrument's instruction manual in detail and operate in accordance with the instrument's standard procedures and operating methods. At the same time, in order to obtain accurate results, attention needs to be paid to details such as the conditions for sample collection and storage, as well as the calibration and maintenance of the equipment.